-
The floor anchor bracket is an accessory which reinforces the end slat.It provides a 3rd point of closure for the shutter, thus guaranteeing additional security.
-
The floor anchor bracket is an accessory which reinforces the end slat.It provides a 3rd point of closure for the shutter, thus guaranteeing additional security.
-
margin-right:0cm">Le joint d'étanchéité sous la lame finale épouse parfaitement le sol à la fermeture. Il offre également une protection aux projections extérieures (air, eau)
-
Crank for Hoist 4mm7 at 90 degrees Long pin ball 1100 mm
-
Crank for Hoist 47mm at 45 degrees Long pin ball 1100 mm
-
Crank for Hoist 47mm Long pin ball 1100 mm
-
Other name: die. Galva steel base supplied with tube-locking screw.
-
Micro switch supplied with its baseplate and screw kit.
-
Reversing button. 2 reversing up/down contacts on a plastron. Operation via sustained pressure or dead man's switch. Recommended for use in stores and private buildings.
-
Optional lighting for automatic, pulse or combined operation, accessible to the public. Bulb E14/230V/25w.Attached to: - On SOMMER TD or Horizon operator: Requires SV568 Box- On INDUS operator: requires a Pic 4410- On Shutters: requires a Pic 4410 or
-
Rod delivered without rod guide.
-
Thickness 15/10°. Bare lacquered end slat shade close to 9010.<BR/>Delivered without drill holes or lock.
-
Thickness 15/10°. Bare end slat.<BR/>Delivered without drill holes or lock.
-
Pre-lacquered sheet in original white before molding
-
Reversing button. 2 reversing up/down contacts on a plastron and protruding frame Functions via sustained pressure or dead man's switch. Recommended for use in stores and private buildings.
-
Isolated mechanism to be assembled onto square tube 16. Reservation 50mm behind the plate.Hoist for Murax intermediate 47 supplied with its 2 screws + fastening nuts.
Specific need
Should you require customized products or colors, please, contact us
You did not find the product you were looking for ?
Contact us !